Used 2006 Isuzu NPR IBT AIR PWL
Request A Test Drive
Make An Offer
- AISIN 450-43 LE 4 SPEED AUTOMATIC TRANSMISSION
- ISUZU DIESEL ENGINE, 4HK1-TC, 317 CID (5.19L), 190 GROSS HP AT 2600 RPM: 387 LB-FT GROSS TORQUE AT 1500 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, OVERHEAD CAM, TURBOCHARGED, INTERCOOLED, WATER COOLED EGR VALVE, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM
2006 Isuzu NPR
GVWR: 12,000 lbs
185,448 Miles on the odometer
This maintained 2006 Isuzu NPR is being offered out of Wylie, TX as a cab and chassis that is ready to be put to work again. Rugged and tested, this fleet maintained truck gets the job done along with cold AC. The interior is exactly how it appears in the pictures, with a few tears in the driver’s seat, yet is still a relaxed environment to be in. The flaws in this truck are a cracked windshield and the back windscreen has been filled in. As stated before though, this truck is mechanically sound and is more than ready to have many more miles put on it during future jobs.
All inquiries should be directed to Eric Nelson at 972-746-3784 or sales@DallasMotorsports.com
- Cruise control
- Floor mats
- Steering, Integral power steering - with variable 18.8-20.9:1 gear ratio. Tilt and telescoping steering column.
- Cab Mounts, All steel low cab forward - BBC 66.8 in. (169.7 cm) in 45 deg. mechanical tilt with torsion assist.
- Color, Arctic White
- Mirror, Dual cab mounted exterior mirrors
- Paint Scheme, Solid
- Two way roof ventilator
- Windows, Tinted glass
- Air Cleaner, 12.6 in. diameter dry paper single element - Donaldson Brand
- Alternator, 110 AMP with integral regulator
- Battery, Dual Delco 12-V maintenance free 750 CCA each
- Brake System, Dual circuit, hydraulic brake system - Hydro-boost, with load sensing proportioning valve in rear circuit and a metering valve between the master cylinder and 6-way joint on the front brake lines. Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos linings are standard. Anti-lock brake system.
- Exhaust Brake, Butterfly valve type
- Exhaust System, Single horizontal exhaust system
- Frame, Ladder type channel - section straight frame rail 33.5 in. (85.1 cm) wide through the total length of frame. Yield strength 44,000 psi (303,369 kPa) section modulus of 7.20 and RBM 316,800.
- Front Axle, "I"-beam rated at 6830 lbs. (3098 kg) - Includes integral hydraulic power steering Ratio 18.8-20.9:1
- Front GAWR, 4700 lbs (2132 kg) capacity
- Front Shock Absorber
- Front Stabilizer Bar
- Front Suspension, Tapered Leaf, 8440 lbs. (3828 kg) capacity - Semi-elliptical tapered leaf springs. Includes shock absorbers and stabilizer bar.
- GVWR, 12,000 lbs (5443 kg) capacity
- Isuzu Diesel Engine, 4HK1-TC, 317 CID (5.19L), 190 Gross HP at 2600 RPM: 387 lb-ft gross torque at 1500 RPM. 4 cylinder, 16 valve, four cycle, overhead cam, turbocharged, intercooled, water cooled EGR valve, direct injection, electronically controlled common rail fuel system Engine cruise control and idle up function. Oil level check switch and light. Rear engine cover.
- Rear Axle, R040, single-speed, 11,020 lbs (4999 kg) capacity - single speed with oil lubricated rear wheel bearings
- Rear Axle Ratio, 5.125:1
- Rear GAWR, 7950 lbs (3606 kg) capacity
- Rear Shock Absorber
- Rear Suspension, Multi-Leaf, 9880 lbs. (4481 kg) capacity - Semi-elliptical main and auxiliary leaf springs. Includes shock absorbers.
- Rear wheel drive
- Transmission, Automatic, Aisin, 450-43 LE 4 speed automatic transmission, Ratios: 3.018, 1.548, 1.000, 0.703, Rev. 2.678
- Truck Application
- Wheelbase, 109" (276.9 cm) - includes ladder type channel frame. Full C section straight frame 33.5 inches wide. Yield strength 44,000 psi section modulus 7.20 in3 RBM 316,800 lb/ft/in per rail.